How To Root Samsung Galaxy J3 Prime Android Smartphone

Samsung Galaxy J3 Prime is a top end Android smartphone, which comes out with 5.5 inches Super AMOLED touchscreen display powered by 2.4 GHz Octa-core processor along with 4 GB RAM and it runs on Android V 7.1 (Nougat) operating system. If you are using this smartphone and looking for a way to root it, you are in the right place as I have given a tutorial to root Samsung Galaxy J3 Prime smartphone here.

Just by following the tutorial given here, you will be able to root Samsung Galaxy J3 Prime smartphone by flashing TWRP recovery in it. Once you have gained root privileges on your device, you will be able to install custom ROM firmware’s (which are using latest Android versions), custom-built Android applications, etc.

WARNING: Rooting your Samsung device will void its warranty. Also, rooting might sometimes result in a bricked device. So, if your device gets into trouble while following this tutorial, do not hold me liable. Please proceed at your OWN risk.

Root Samsung Galaxy J3 Prime

Prerequisites:

1) To get started, take a complete backup of personal data on your smartphone using appropriate apps. We will use this backup to restore your personal data if your device gets corrupted during the rooting process.

2) Next, download Samsung Galaxy J3 Prime USB driver and install it in your computer. Only by installing the USB driver on your device, you will be able to connect the smartphone to computer.

3) Now, enable “Developer Options” in your device by following this path: Settings -> About Phone -> Build Number (tap on it for 7 times). Once done, enable USB debugging mode by following this path: Settings -> Developer Options -> USB Debugging.

Enable USB Debugging Mode

4) Next, ensure that your device has at least 50-60% battery backup in it before getting started with the rooting procedure as it is a battery-consuming one.

Once you have finished all these prerequisites, you can move forward with the rooting tutorial given below.

Tutorial To Flash TWRP Recovery In Samsung Galaxy J3 Prime:

1) To get started, download Odin and Samsung Galaxy J3 Prime TWRP recovery image (twrp-3.1.1.img.tar) to your computer. Once downloaded, launch Odin window.

2) Next, switch off your smartphone and boot into the download / bootloader mode by pressing and holding the Volume Down, Power and Home buttons simultaneously.

Download Bootloader Mode Samsung Smartphone

3) Once your device boots into the download mode, connect it to your computer using the original USB data cable. If you have installed the USB drivers of Galaxy C7 in your computer properly, Odin will automatically identify your device, and you will see a “Added” message in its Logs. Also, the ID:COM will turn to “Blue” color.

Odin3 Added Message

4) Now, click on the “AP” button in Odin window and select the twrp-2.8.7.0-j2lte.img.tar file.

Odin3 AP Button

5) Next, click on the “Start” button to launch the flashing process (which will take a minute or two to get completed). Once the flashing process is finished, you will get a “PASS” message in the Odin. Your device will also get rebooted.

Odin3 Pass Message

6) Now, unplug your smartphone from the computer.

That’s it. Now, you have successfully finished flashing TWRP recovery in Samsung Galaxy J3 Prime smartphone. Let’s find out how you can root your device.

Tutorial To Root Samsung Galaxy J3 Prime:

1) To get started, download SuperSU and save it in your computer. Once done, connect your smartphone to the computer using the original USB data cable and transfer the SuperSU file to its internal memory. After successfully transferring the file, unplug your device from the computer.

2) Now, boot your device into the TWRP recovery by pressing and holding the Volume Up, Power and Home Buttons simultaneously.

Recovery Mode Keys Combination Samsung Smartphone

3) Once your device boots into the TWRP recovery mode, click on “Install” and select the SuperSU file in your device’s internal memory to launch the flashing process.

Flash SuperSU Via TWRP In Nexus 5X

4) Once the flashing process is finished, reboot your smartphone.

That’s it. Now you have successfully finished root Samsung Galaxy J3 Prime Android smartphone. To confirm the root privileges of your smartphone, use the Root Checker for Android app from Google Play Store.

 

The post How To Root Samsung Galaxy J3 Prime Android Smartphone appeared first on Android News.

Check Also

Download Android Pie based OxygenOS for Redmi Note 5 Pro

Now you can Update Redmi Note 5 Pro to Android 9 Pie by installing latest OxygenOS ROM. Redmi Note 5 pro is a popular device and there are already have lots of custom ROM available for the device. The OxygenOS is the latest addition to the list and which is ported from OnePlus 5T. If you want to taste Android 9.0 Pie ROM on Redmi Note 5 Pro then follow our guide to Download OxygenOS Redmi Note 5 Pro. XDA Senior Member LeekGeek released the initial build of OxygenOS for Redmi Note 5 Prowhich is based on Open beta build but stable enough to use it as a daily driver. The ROM comes with many Android Pie and OxygenOS features but may contain some bugs. You need to be rooted, and TWRP installed on your device to use this ROM. Download Android Pie based OxygenOS for Redmi Note 5 Pro from below. The ROM is an initial Android Pie build for Redmi Note 5 pro and missing many features but it’s improved with time, but the good news is you can experience Android Pie based OxygenOS on Redmi Note 5 ..

Leave a Reply

Your email address will not be published. Required fields are marked *