EKWB Releases New Varder EVO Fan with Start-Stop Function

EKWB recently released a new lineup based on its EK-Vardar fans. The Vardar line was established in 2014 and created to be an industrial grade high-static pressure computer cooling fan. EK says the line was designed and built primarily for highest-performance computer liquid cooling systems, a fitting choice as the fan name “Vardar” is a term used for a cold northwesterly wind blowing into the valleys of Macedonia in the Balkans. The Vardar line has now grown into the new EK-Vardar EVO series of fans offering users the ER EVO which an extended range of PWM operation featuring a special start-stop function. The EVO “S” line for quiet operation, and the Furious Vardar EVO for moving the most air.

EK says the electronics on the ER EVO fan has been tweaked so the fan stops spinning if the PWM signal falls below a preset duty cycle value. In other words, when the PWM duty cycle is set below 25-30%, the fan will stop spinning. Once the PWM duty cycle is increased, the fan will then spin up. Being able to stop and start the fan can bring benefits of a totally silent PC, prolong the life of the fan, and can slow the buildup of dust on the heatsink or radiator by only running when it needs to. 

The new electrical design uses actively cooled motor windings and Hydro-Dynamic bearings with a 50000 hour MTBF. The frame shape is said to provide optimal performance with either pull or push configurations. The shape of the frame allows the power cables to be routed through it when putting fans together on a radiator.

The Vardar EVO line comes in both 120mm and 140mm size. They all aim to be a high-static pressure, low noise profile fan with each using a 7 fan blade design. Vardar EVO fans come in single (all black or all white) and two-tone (black with gray blades). The original Vardar’s maximum fan speed was designated by letter/number combination like the Fujita scale F3, F4, etc. The higher the number, the faster the fan would run. The EVO series changes that up usingnd has different names altogether. The basic EVO 120S/140S model spins up to 1150 RPM, the 120ER and 140ER models (ER designates the start/stop ability) reach 2200 RPM, while the EK-Furious Vardar reaches 2500 RPM for the 140mm, and 3000 RPM for 120mm. 


EK-Vardar EVO ER fans are already available at the EK Webshop and online through EKWB’s Partner Reseller Network. The EK-Furious Vardar EVO and white EK-Vardar EVO fans will be available in the next few weeks. 

EK-Vardar EVO
Vardar EVO 120S Vardar EVO 140S Vardar EVO 120ER Vardar EVO 140ER Furious Vardar EVO 120 Furious Vardar EVO 120
0dB Technology N N Y Y N N
Max. Speed 1150 RPM 2200 RPM 3000 RPM 2500 RPM
PWM Duty Cycle 60-100% 25-100%
(Extended Range)
Power Draw .55W 2.16W 5.64W 9.07W
Max. Airflow (CFM) 40 64 77 108 107 144
Static Pressure (H20) 0.92mm 1.08mm 3.16mm 3.15mm 5.71mm 5.28mm
Noise Level (dBA) 23.7 26 33.5 40.7 42 48.4
Shaft Bearing Hydro-Dynamic
MTBF 50000 Hours @ 40C
Price (inc. VAT) 14.95€ 18.95€ 16.95€ 20.95€ 16.95€ 20.95€


The post EKWB Releases New Varder EVO Fan with Start-Stop Function appeared first on Android News.

Check Also

Download OxygenOS 5.0.8 for OnePlus 3 and OnePlus 3T

Latest Oreo-based OxygenOS 5.0.8 update for OnePlus 3 and OnePlus 3T starts rolling out. The OxygenOS 5.0.8 update fixes general bugs and brings system improvements and brings November 2018 Security Patch. Download OxygenOS 5.0.8 for OnePlus 3 and OnePlus 3T from below. The update is rolling out via OTA (over-the-air) and many users already getting OxygenOS 5.0.8 for OnePlus 3T. The update is incremental and rolls out in phase wise manner. You can wait for the OTA updates, or you can Update Oneplus 3/3T to OxygenOS 5.0.8 manually with below method. Download OxygenOS 5.0.8 for OnePlus 3 and OnePlus 3T from below. The new OxygenOS 5.0.8 for OnePlus 3T and OnePlus 3 fixes general bugs and brings system improvements. (Check the complete changelogs from below). We provide you the OxygenOS 5.0.8 OTA file which you can flash on your device. So if you want to update your OnePlus to the latest version then Download OxygenOS 5.0.8 for OnePlus 3 and OnePlus 3T from below. Check below what’s new..

Leave a Reply

Your email address will not be published. Required fields are marked *